• Designed to seamlessly integrate with the parSYNC®, the 3DATX Scotty is
  an optional GPS + Weather Station hybrid add-on that will take your
  emissions testing to the next level! This powerful accessory is modeled to
  enhance the evaluation and interpretation of real-time emissions by
  providing crucial information about geographical location and ambient
  weather.

Key Features:

• Easy and Secure Magnetic Mounting System
• Real-time data with 1 Hz updates
• Global coverage with GPS, GLONASS, Galileo, and QZSS
• High Accuracy Measurements: 2.5 m, ±2% RH
• Low Power Consumption

Designed to seamlessly integrate with the parSYNC® FLEX, the 3DATX OBD Data Logger is an optional device used to capture vehicle activity data. This means that vehicle and engine speed, air flow rate, throttle position, lambda, air intake temperature and much more can be captured straight from the vehicle. In-house software is available to time align this data to the parSYNC® emissions data, and then calculate mass-based emission results. 
  
Key Features:

• Real-time data with 1Hz acquisition frequency
• Adapter to allow access to both light and heavy-duty vehicles
• Access to a wide range of different ECU parameters/ On-board diagnostics (OBD)
• Low vehicle power consumption 

Powering both FLEX and CUBE systems are four (4) Milwaukee M18 5.0 Ah Li-Ion batteries.  They can be charged quickly and are hot-swappable so can be changed mid-test for extended usage. Milwaukee is a well-known and trusted brand, offering high class construction to deliver reliable performance.

Key Features:

• Optimized performance and over load protection
• Long lasting performance and durability
• On-board fuel gauge
• 2.5X more run time
• 20% more power than a standard 18V lithium battery
• 2X more life than a standard 18V lithium battery

Powering the FLEX-PNC system are two (2) Milwaukee M18 8.0 Ah Li-Ion batteries.  They can be charged quickly and are hot-swappable so can be changed mid-test for extended usage. Milwaukee is a well-known and trusted brand, offering high class construction to deliver reliable performance.

Key Features:

• Optimized performance and over load protection
• Long lasting performance and durability
• On-board fuel gauge
• 2.5X more run time
• 20% more power than a standard 18V lithium battery
• 2X more life than a standard 18V lithium battery

Did you know you can connect a third-party exhaust flow meter to the parSYNC® FLEX? This feature means that exhaust flow rate can be
incorporated in real-time and used to calculate accurate mass emission rates from the measured concentration values.

Shown here, is a setup combining the FLEX and a third-party EFM.

Key Features:

• Real-time data at high acquisition frequency
• Ability to attach any chosen exhaust flow meter, allowing bespoke access to both light and heavy-duty vehicle exhaust flow measurement
• In-house software allows calculation of mass emission rates

Modern diesel vehicles with SCR are equipped with onboard NH3 and NOx sensors but their readings are typically unavailable from OBD. parSYNC® users can install similar sensors in a tailpipe extension and directly read concentration data in real-time.

 Key Features:

• Enhance your testing capabilities with minimum effort
• Pre-configured to work with leading sensor models
• Custom development options for other models

Temperature is a key parameter for evaluating emissions from modern vehicles with catalyst aftertreatment. The parSYNC® FLEX has CAN-based thermocouple interface to get real-time temperature data easily and quickly from over ten (10) sensors simultaneously. Get the competitive advantage with temperature data from aftertreatment catalyst, tailpipe tip, engine bay, engine oil or coolant, cabin, ambient air, and more! 
  
Key Features:

• Real-time data at high acquisition frequency
• Potential for access to a wide range of different system temper 
• Ability to design your own bespoke emissions test setup
• Low power consumption

Are you ready to make your parSYNC® virtually limitless?

Simply connect a 5-port expansion accessory to one or all the 4 CAN native ports on the parSYNC® iPEMS unit to accommodate up to 20 different sensors or devices. With options like GPS, weather station, thermocouple, and flow meter, your emissions testing possibilities are endless!

The parSYNC FLEX utilises a hot-swappable cartridge technology for optimum flexibility of test setup and adaptability to conditions in the field. It also allows for our cartridge recycling program, reSYNC, which is better for the environment and decreases user running costs.

The FLEX has three different cartridges, each measuring a specific set of pollutants. The measurement ranges for each are optimised to suit anticipated combustion concentrations, with high response time, resolution and accuracy. The three cartridges and their working principles are: 

• C-GasMOD Cartridge measures CO, CO2, HC via NDIR and O2 via electrochemical cell 
• N-GasMOD Cartridge measures NO and NO2 via individual electrochemical cells 
• Particulates Cartridge measures PN and PM via combination of Scattering, Ionization and Opacity sensor values. 

The gases are transported to and from the FLEX equipment via A-60-G Tygon sample tubing with an internal diameter of 3.175 mm (0.125 in). This high-performance, low gas-permeability tubing is resistant to acids and alkali, and it can withstand extreme temperatures without cracking or deteriorating. This makes it ideal for the transport of exhaust gas.

Key Features:

• Superior weathering

• Abrasion resistant

• Outstanding flexural fatigue resistance

• Wide temperature range (-60°C to 135°C)

• Low gas permeability versus rubber tubing

• Ozone (300 pphm) and UV light resistant

Available with or without connectors.

There are two different types of pumps employed by the FLEX system, depending which iteration of the FLEX is being considered: The Parker E107-12-090, a 9V, 1500 hr pump is employed by FLEX units up to ES0037, and the Parker E259-12, a 12V, 10000 hr pump is employed from FLEX serial number ES0038 onward. 

The parSYNC FLEX is equipped with a sample probe for exhaust tailpipe sampling. This sample probe can be attached straight into the tailpipe of a vehicle using the metal clip, allowing representative exhaust sampling for accurate pollutant concentration measurement.